20V MAX* Brushless Cordless 2 in. Magnetic Drill Press with FLEXVOLT ADVANTAGE™ (Tool Only)
HIGH DRILLING CAPACITY: Drill up to a 2 in. hole through 2 in. of structural steel
ADJUST SPEED BASED ON THE DEMANDS OF THE JOB with 5 variable speeds for each of the 2 mechanical gears for a total of 10 speed settings
PERMANENT MAGNET that requires no electrical charge to attach to steel
Product Overview
This 20V MAX* Brushless 2 in. Magnetic Drill Press Kit features FLEXVOLT ADVANTAGE™ technology that makes the drill up to 32% more powerful when using a DEWALT FLEXVOLT® DCB609 battery**. Built to help prevent tool failure due to lost power, it securely attaches to 1/4 in. and thicker metal by using a permanent magnet base that requires no electrical charge. This high-performance magnetic drill press packs the capacity to drill up to 40 holes per charge****. The Quick-Change Chuck system allows for tool free change between 3/4"" Weldon Shank and 1/2"" keyed chuck (included). To keep the user in control, the E-CLUTCH® is designed to turn off when it detects rotation, part of the PERFORM & PROTECT™ family. The drill has 5 variable speeds for each of the 2 mechanical gears for a total of 10 speed settings to allow for a wide RPM range for a variety of applications.
Additional Features
QUICK CHANGE CHUCK SYSTEM allows for tool free change between 3/4" Weldon Shank Bits and 1/2" keyed chuck
GREATER RANGE OF ACCESORY COMPATIBLITY with the motor height adjustment
FORWARD/REVERSE CONTROL to allow for a greater range of applications like tapping
HELP TO ILLUMINATE DRILLING AREA with on-board LED
LONG RUNTIME: drill up to 40 holes per charge****
Up to 32% more powerful when using a DCB609G battery**
E-CLUTCH® is designed to turn off when it detects rotation, part of the PERFORM & PROTECT™ family
TRACK AND LOCATE WITH TOOL CONNECT™ APP: Installing a DEWALT TOOL CONNECT Chip allows for monitoring and pinpointing of the drill location on the jobsite (chip sold separately)
Includes
- (1) DCD1623 20V MAX* Brushless 2 in. Magnetic Drill Press
- (1) 1/2 in. Keyed chuck attachment
- (1) Chuck key
- (1) Fluid reservoir with tube
- (1) Chip guard
- (1) Safety chain
- (2) DEWALT Annular cutter ejection pin
- (1) Kit box
- (1) Feed handle set
- (1) Reservoir bracket
- (1) Allen key
- (1) Wrench
- (1) Wing bolt
Specifications
|
Brushless
|
Yes
|
|
Clutch
|
Yes
|
|
Length of drill stroke [Imperial]
|
5.8 in
|
|
No Load Speed (RPM)
|
810
|
|
Overload Protection
|
Yes
|
|
Product Height [Imperial]
|
13.58 in
|
|
Led light
|
Yes
|
|
Power Source
|
Cordless
|
|
Reverse
|
Yes
|
|
Product Weight [Imperial]
|
31.8 lbs
|
Support
Warranty
- 3 Year Limited Warranty, 1 Year Free Service, 90 Days Satisfaction Guaranteed
We’re confident of the quality of our products, and we’ll repair, without charge, any defects due to faulty materials or workmanship within the specified warranty.
Service
We take extensive measures to ensure all our products are made to the very highest standards and meet all relevant industry regulations.
Support Manual
Disclaimer(s)
-
*Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18 volts.
-
**Using DCB609G battery vs. DCB205 battery (sold separately)
-
****Up to 40 holes per charge on 1/2 inch ASTM A36 steel 13/16 inch hole size using DCB609G battery (sold separately)