20V MAX* XR® 18-in. Bandfile (Tool Only)
DCM200B
20V MAX* XR® 18-in. Bandfile (Tool Only)
- BRUSHLESS MOTOR delivers more power than pneumatic** with 700 MWO of power rotating up to 5,600 ft/min
- 104° ROTATING ARM provides flexibility and convenience with the storage position
- TOOL FREE BELT CHANGE permits simple belt changes
Product Overview
The DCM200B 20V MAX* XR® 18-in. Bandfile (Tool Only) provides More Power Than Pneumatic** for tough commercial applications rotating up to 5,600 Ft/Min with 732 MWO. This power is controlled with a variable speed trigger and speed setting dial. A 104° Rotating Contact Arm enables the user to take full advantage of the portability and versatility and to access hard to reach spaces. Coupled with a Rotating LED to help illuminate the workspace and tool-free belt change the DCM200 provides user convenience, mobility and versatility. Lastly, the DCM200 18in Bandfile utilizes DEWALT's 20V MAX* system, it joins 300+ products in the 20V MAX* line, each engineered to meet the specific needs of demanding trades.
Additional Features
- CHANGEABLE CONTACT ARM allows the user to complete multiple applications
- VARIABLE SPEED DIAL AND TRIGGER provides end user control
- ROTATABLE LED allows for flexibile jobsite visibility
- TOOL CONNECT™ CHIP READY with integrated chip pocket (chip not included)
Includes
- (1) DCM200 20V MAX* XR® 18-in. Bandfile
- (2) 80 Grit 18-in. (457mm) Sanding Belts
Specifications
|
No Load Speed (RPM)
|
26938
|
|
Voltage
|
20 V
|
|
Number of Pieces
|
3
|
|
Power Source
|
Cordless
|
|
Is it a Set
|
No
|
|
Product Weight [Imperial]
|
2.6 lbs
|
|
Packaging
|
Carton
|
|
Power
|
732 W
|
Support
Warranty
- 3 Year Limited Warranty
We’re confident of the quality of our products, and we’ll repair, without charge, any defects due to faulty materials or workmanship within the specified warranty.
Service
We take extensive measures to ensure all our products are made to the very highest standards and meet all relevant industry regulations.
Support Manual
Disclaimer(s)
- * Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.
- ** Based on MWO, using DCBP034 battery (sold separately) vs. pneumatic-powered Dynabrade® Dynafile® 14000, 14010 Abrasive Belt Tools. Dynabrade® Dynafile® II 40320, 40321, 40324, 40326, 40335, 40381 Abrasive Belt Tools. Dynabrade® Dynafile® III 15300, 15302, 15400, 15401, 15420 Abrasive Belt Tools. DYNABRADE® and DYNAFILE® are registered trademarks of Dynabrade, Inc., which has not endorsed or approved this comparison.